Transfer

Changeover & ATS

MCB Changeover manually switching to an alternate source power supply — plus ACCL automatic changeover with current limiter.

MCB Changeover manually switching to an alternate source power supply. MCB Changeover Switch usage in industries & domestic area especially for use in low voltage distribution circuits. MCB switchover switches are used to shift from one source to another source and vice-versa.

The changeover switch comes in 2P and 4P versions. It has three positions (I-O-II) with centre-off. They are switch disconnectors with the independent manual operation, capable of making, carrying and breaking currents under normal circuit conditions.

Features

MCB Changeover Switch.

01
Compact ConstructionCompact size and easy mounting.
02
Silver Contact TipsFor better electrical conductivity.
03
Centre position offFront operation with three stable positions I-O-II, Off at middle position.
04
MountingEasy snap on DIN Rail mounting. Vertical and can be mounted with other products like MCB, RCCB & Isolators in distribution board.
05
ContactsDouble Break Contacts.

ACCL

Automatic Changeover with Current Limiter (ACCL)

A changeover device, which on failure of Mains power supply, automatically transfers the load from Mains power supply to Generator supply. It also functions as a Load Limiter with monitoring of current drawn from Generator, thereby reducing stress on the Generator for Seamless Changeover between Power Sources.

ACCL Features

Automatic transfer with load management.

01
Potential free contact for connecting power load (Single Phase/Relay Version)Compact size saving panel space
02
Dual Interlock between Mains & Gen supply (Electrical & Mechanical)Manual reset provision
03
Automatic Generator Start/StopOverload monitoring of Generator supply
04
Indication of status through coloured LEDBreak before make changeover system
05
Reduced wiring cost as single phase ACCL has separate control for power and lighting offIntelligent re-connection once trip has occurred due to either over voltage or overload.
06
Under and Over voltage protection when load is running on DGMicrocontroller based automatic source changeover with neutral isolation.
07
Staggered terminal design for better isolation between phase and neutralEco friendly thermoplastic and fire retardant body cover.

Certified excellence

Quality is not a department. It is the whole factory.

ISO 9001:2015 and CE-certified operations. BIS/ISI licensed manufacturing audited annually against IEC/IS standards — from raw material to finished pole.

ISO 9001:2015 CE Certified ISI Mark Licensed IEC / IS Audited

Our quality standards